Audio Technica AT-LP3 Turntable, White
Key Features
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Balanced straight tonearm with hydraulically damped lift control and lockable rest
- Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
- Switchable modes for moving magnet and moving coil cartridges
- AT91R Dual Moving Magnet phono cartridge and AT-HS3 universal headshell
Audio Technica AT-LP3 Turntable, White Overview
A revolution in automation, the AT-LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33 & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm's removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.
Product Ref: 204884
Full Description
Award
2017 Best Turntable Under £200
“An almost-all-in-one, budget turntable that treats your records as music and not a mere curiosity”
May 2017 - "One of the best automatic turntables we've ever heard."
A revolution in automation, the AT-LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33 & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.
AT91R Dual Moving Magnet Cartridge
Specially designed for the LP3, the AT91R Dual Moving Magnet phono cartridge incorporates an aluminium cantilever for higher-rigidity and improved pick-up of subtle details.
Universal Headshell
Removable universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Suitable for 1/2" mount cartridges and 4-pin turntable arms.
Balanced Tone Arm
Incorporating a hydraulically damped lift control and lockable rest, the LP3’s straight balanced tonearm includes a radial ball bearing for horizontal movement and pivot bearings vertical movement.
4.5mm Platter Mat
Reducing unwanted vibration and for stable play, the LP3 includes a 4.5mm thick rubber platter mat.
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Balanced straight tonearm with hydraulically damped lift control and lockable rest
- Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
- Switchable modes for moving magnet and moving coil cartridges
- AT91R Dual Moving Magnet phono cartridge and AT-HS3 universal headshell
- Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
- Damped base construction for reduced low-frequency feedback colouration
Turntable
| Type | Fully Automatic, Belt-Drive |
|---|---|
| Motor | DC motor |
| Speeds | 33-1/3 RPM, 45 RPM |
| Turntable Platter | Die-cast aluminium |
| Wow and Flutter | Less than 0.2 WRMS (33 1/3 RPM) at3kHz |
| Signal-to-Noise Ratio | > 60 dB |
| Output Level | “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec |
| Phono Pre-Amp Gain | 36dB nominal, RIAA equalised 56dB nominal, RIAA equalised |
| Power Supply Requirements | 220 to 240 V / 50, 60 Hz |
| Power Consumption | 2W |
| Dimensions (W×D×H) | 435 mm ×353 mm×128 mm |
| Weight | 5.2kg |
Cartridge & Stylus
| Model | AT91R |
|---|---|
| Type | VM Dual Magnet |
| Output Voltage | 3.5mV (mV at 1kHz, 5 cm/sec) |
| Vertical Tracking Force Range | 1.5 to 2.5g (standard 2.0g) |
| Stylus Construction | 0.6 mil bonded conical |
| Cantilever | Aluminium pipe |
| Recommended Load Impedance | 47,000 ohms |
| Weight | 5.0g |
Headshell
| Model | AT-HS3 |
|---|---|
| Weight | 11.1g |
| Overhang Adjustment | 8mm |
Tone arm
| Type | Static balanced straight shaped with soft damping control |
|---|---|
| Effective Length | 221.5mm |
| Overhang | 19mm |
| Maximum Tracking Error Angle | Less than 3° |
| Stylus Pressure Adjustment Range | 1 to 4g |
| Applicable Cartridge Weight | 14.5 to 20g |
| Anti-skating Range | 0 - 3 g |
| Reviews of our service
View all
