Buy now and pay in 30 days - interest free
Split the cost into 3 equal monthly payments of £26.67 - interest free
Decades of dealing with long, ugly cable runs can be consigned to history in minutes by installing Monitor Audio's diminutive new WT-1/WR-1 wireless link. Measuring just 6cm round by 4cm deep, the WT-1 transmitter and WR-1 receiver establish an automatic lossless audio connection between analogue outputs and inputs over a range of up to 10 metres. The pairing is entirely intuitive and immediate: no elaborate button pushing is necessary.
Tucked out of the way behind equipment, the WT-1 transmitter simply plugs into the analogue LFE or pre-outputs on your AVR or player, and the WR-1 receiver into the inputs of a remote subwoofer or amp. The unobtrusive, ultra-compact modules then use the 2.4GHz digital band to send uncompressed full-range audio through the air between them. Effortless installation replaces long runs of ugly wire to wirelessly extend the power of Monitor Audio's WS-10 active subwoofer, and enable full-range, wire-free performance and convenience in any set-up missing wireless functionality, but with idle analogue inputs and outputs.
|Format||Compact Wireless transmitter and receiver modules|
|Frequency Response||20hz – 20khz|
|Wireless Type||Lossless/uncompressed digital 2.4ghz band|
|Wireless Range||10M (dependant on building construction)|
|Inputs||Analogue stereo inputs/outputs (RCA)|
|A.C Mains Adaptor||External plug type power supply (94-264 Vac)5V output with world plug pins|
|D.C Input||Voltage 5V @ 50ma|
|Indicators||LED – on/connected|
|Power Consumption||<0.5W standby - ErP certifed|
|Dimensions||60mm round x 40mm deep|
|Approvals||etL/ ce/ fcc/cB/ erp|