Key Features
- Mono design for dedicated channel power
- Capable of 100W at four-ohm and 70W at eight-ohm (THD+N less than one per cent)
- Features balanced XLR/TRS and single-ended RCA inputs for flexible connectivity
- Ultra-low distortion with 151dB dynamic range
- 12V trigger (cable included) for seamless power syncing
Topping Pre Series B100 Class AB Power Amplifier, Black Overview
The Topping Pre Series B100 Class AB Power Amplifier is a mono amp built for high-fidelity systems, featuring the T'ang-ku-la Module which uses a brand-new three-stage feedback circuit to minimise distortion and enhance dynamic range to 151dB. This makes it a strong choice for powering premium passive speakers. It is capable of delivering 100W at four-ohms and 83W at eight, ensuring dependable performance across different speaker loads.
For connectivity, the B100 features a combo XLR/TRS input alongside an RCA input, making it easy to pair with a wide range of preamps and DACs. It also features a 12V trigger input, meaning seamless power syncing with a second B100 and connected pre-amp equipment, adding convenience to your system. High-quality speaker terminals ensure a secure connection, while three selectable gain settings (low, medium, and high) let you fine-tune the output to suit your setup.
Product Ref: 325582
Full Description
View Full DescriptionWhat’s in the Box?
- Topping B100 Power Amplifier
- AC to DC power adapter
- AC cable
- 12V trigger cable
- Product information card
Specifications
THD+N @1kHz (A-wt)
| BAL | <0.00008% @4Ω 5W <0.00008% @8Ω 5W |
|---|---|
| SE | <0.00008% @4Ω 5W <0.00008% @8Ω 5W |
THD @20-20kHz (90kBW)
| BAL | <0.00007% @4Ω 5W <0.00007% @8Ω 5W |
|---|---|
| SE | <0.00007% @4Ω 5W <0.00007% @8Ω 5W |
SNR (A-wt)
| BAL | 151dB |
|---|---|
| SE | 149dB |
Dynamic Range @1kHz (A-wt)
| BAL | 151dB |
|---|---|
| SE | 149dB |
Frequency Response
| BAL | 20Hz-40kHz (±0.1dB) 10Hz-100kHz (±0.5dB) |
|---|---|
| SE | 20Hz-40kHz (±0.1dB) 10Hz-100kHz (±0.5dB) |
Output Level
| BAL | 56Vpp @4Ω 66Vpp @8Ω |
|---|---|
| SE | 56Vpp @4Ω 66Vpp @8Ω |
AP Measured Noise Level @A-wt
| BAL | <0.7uVrms @G=L <1.2uVrms @G=M <2.6uVrms @G=H |
|---|---|
| SE | <0.9uVrms @G=L <2.3uVrms @G=M <6.2uVrms @G=H |
Actual Noise Level @A-wt*
| BAL | <0.3uVrms @G=L <1.0uVrms @G=M <2.4uVrms @G=H |
|---|---|
| SE | <0.7uVrms @G=L <2.2uVrms @G=M <6.2uVrms @G=H |
Input Sensitivity
| BAL | 26.6Vrms @G=L 8.6Vrms @G=M 3.0Vrms @G=H |
|---|---|
| SE | 13.3Vrms @G=L 4.3Vrms @G=M 1.5Vrms @G=H |
Gain
| BAL | 0dB @G=L 10.4dB @G=M 19.9dB @G=H |
|---|---|
| SE | 6dB @G=L 16.4dB @G=M 25.9dB @G=H |
Output Impedance
| BAL | <5mΩ |
|---|---|
| SE | <5mΩ |
Input Impedance
| BAL | 20kΩ |
|---|---|
| SE | 5kΩ |
Output Power
| BAL | 100W @4Ω THD+N<1% 83W @8Ω THD+N<10% 70W @8Ω THD+N<1% |
|---|---|
| SE | 100W @4Ω THD+N<1% 83W @8Ω THD+N<10% 70W @8Ω THD+N<1% |
Load Impedance
| BAL | ≥4Ω |
|---|---|
| SE | ≥4Ω |
General product information
| Dimensions (including protrusions) | 200 x 147 x 44 mm |
|---|---|
| Weight | 835g |
| Power input | DC 38V/4.0A (2 pin aviation connector) |
| Signal input | 1 x BAL (Combo)1 x SE (RCA) |
| Signal output | Speaker terminal (BTL output) |
| Other connectors | 12V trigger in (3.5mm jack)Type-C FW port |
| Gain | Three types (H/M/L) |
| Standby power consumption | <1.2W |
| Product code | TOP-B100-B |
| EAN | 6977577361015 |
*Note: The actual noise level is obtained by boosting the noise of B100 by 40dB using a low noise amplifier in front of the APx555B then dividing the measured noise by 100 times.
| Reviews of our service
View all
