Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
Key Features
The Ruark MR1 MK3 Bluetooth Speaker with RS1 Subwoofer, Charcoal is designed for music lovers building a compact, full-bodied desktop or living room system. You get the MR1 MK3’s nearfield tuned 2 × 25W powered speakers, so everyday listening at your desk or in a smaller room stays clear and engaging even at modest volumes. Bluetooth 5.1 with aptX HD, USB-C and a combined optical and aux input make it easy to move between laptop, tablet, TV and more without constantly swapping cables. A built-in moving magnet phono stage keeps vinyl playback straightforward by allowing entry and mid-level turntables to plug in directly.
Adding the RS1 strengthens low-frequency performance through a 170mm long-throw driver, passive radiator and a 100W Class D amplifier. This fills in the natural bass roll-off of compact speakers and helps films and albums feel more immersive. Adjustable crossover and phase controls make it simple to tune the subwoofer to your room and to blend it seamlessly with the MR1 MK3, while the matching charcoal finish gives the whole system a tidy and unified look.
Product Ref: 360118
"powerful, robust-sounding speakers that are a great fit for small spaces, and work particularly well with turntables."
| Typical in-room frequency range | 50Hz – 22kHz |
|---|---|
| Crossover frequency | 2.5kHz |
| Drivers | Custom 20mm silk dome tweeter85mm treated natural fibre cone bass/mid unit |
| Amplifier | 2 × 25W nominal Class D amplification |
| Design | 2-way bass reflex tuned cabinet |
| Internal cabinet volume | 2.0 litres |
| DAC | 104dB 24-bit/192kHz |
| Wireless connections | Bluetooth V5.1, aptX HD, SBC, AAC, BLE, A2DP |
|---|---|
| Physical connections | MM phono input stereo RCA (max 7mV)3.5mm combined stereo jack / optical input (TOSLINK 24-bit/192kHz PCM)USB-C audio in 24-bit/96kHz UAC 1.0Full-frequency subwoofer output mono RCA (max 2.0Vrms) |
| Auto power | Snooze mode 20 min auto-standby and wake-up |
|---|---|
| Adjustable input levels | Aux, phono, optical |
| Finishes | Rich walnut veneer or charcoal lacquer with dark slate woven fabric grille |
|---|---|
| Power consumption | 0.5W standby, 7W typical |
| Product dimensions (H x W x D) | 202 x 135 x 165mm (including RotoDial) |
| Product weight | 2.2kg each |
| Product code | MR1C-CHR |
| EAN | 5060637250372 |
| Frequency response | 25Hz – 200Hz |
|---|---|
| Cabinet | Tuned passive radiator enclosure |
| Drivers | 170mm treated fibre long-throw active driver and 170mm passive radiator |
| Amplifier | 100W RMS Class D with soft clipping filter |
| Controls | Adjustable crossover 50–180Hz, input/volume level control and 180 degree phase switch |
| Auto on | Automatically turns on and sleeps after 15 minutes when no signal is detected |
| Input | Sub-input via Mono RCA input (up to 2.3Vrms) |
| Finishes | Slate Grey cabinet cloth with Rich Walnut or Satin Charcoal lacquer top and bottom panels |
| Product compatibility | RS1 is compatible with our MR1, R3S and R410 models or any other active speaker or amplifier with subwoofer or pre-out phono connectors |
| Power consumption | 0.5W standby, 2.0W idle |
| AC power input | 100-240V, 50-60Hz |
| Product dimensions | H300 × W250 × D265mm (inc. feet and controls) |
| Product weight | 6.7kg |
| Product Code | RS1B-CHR |
| EAN | 5060637250419 |