Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
Key Features
The FiiO SR11 Desktop Streaming Music Receiver is a simple way to add high-quality streaming to your existing hi-fi setup. Just connect it to your DAC and start streaming with Roon or AirPlay. It supports high-resolution audio up to 768kHz-32bit PCM and DSD256, with USB, coaxial and optical outputs for flexible connections. You can go wired with Ethernet or wireless over dual-band WiFi, and control everything using the front-panel display or included remote. If you already have a DAC you trust, the SR11 slots in perfectly.
Product Ref: 336518
The SR11 supports both Roon and Apple AirPlay, giving you a simple way to stream music from almost any device. Use it as a Roon endpoint in your multiroom system, or stream directly from your iPhone, MacBook or iPad using AirPlay. MIX mode even allows both to run in parallel. Everything works over Ethernet or dual-band WiFi, and setup takes just minutes. For Roon users especially, the SR11 offers a reliable, cost-effective way to bring bit-perfect playback to any room.
The SR11 is a digital-only streamer. That means no internal DAC — and no compromise to your existing setup. You get a clean, bit-perfect digital signal via USB-A, USB-C, optical or coaxial outputs. It’s ideal if you already have a DAC you like, or want the freedom to upgrade later. With support for formats up to 768kHz-32bit PCM and native DSD256, the SR11 handles high-resolution audio with ease. Whether you’re running a headphone amp, stereo system or active speakers, it delivers the signal — and stays out of the way.
Despite its small size, the SR11 is easy to control. The front-panel LCD shows connection type, bitrate and volume at a glance, while the included infrared remote lets you play, pause or switch modes without reaching for your phone. A rotary knob on the front panel also gives quick access to settings. The aluminium chassis matches FiiO’s desktop amps and DACs, making it easy to stack or tuck neatly into your setup. Whether on a shelf, desk or rack, it takes up very little space — and adds a lot of flexibility.
| Name/Model | SR11 |
|---|---|
| Colour | Black/Silver |
| Dimensions (W x D x H, including feet) | approx. 157 x 133 x 32.3 mm |
| Weight | approx. 375 g |
| Hardware solution | SoC: X2000WiFi module: AP6256Power supply: G2257Q51UEthernet: YT8531C |
| Volume control | Knob/Remote control |
| Working modes | MIX (Roon Ready and AirPlay two in one), Roon Ready, AirPlay |
| Wireless network | 5G+2.4G dual-band Wi-Fi 802.11 b/g/n/ac |
| Max supported sampling rate for ROON receiving | USB: 768kHz-32bit/DSD256 (DoP)Actual receiving specification depends on the decoding capability of the power ampCoaxial: 192kHz-24bit/DSD64Optical: 192kHz-24bit/DSD64 |
| Max supported sampling rate for AirPlay receiving | All PCM/DSD/MQA will be switched to 44.1kHz-16bit before output |
| MQA | USB/Coaxial/Optical all support MQA when in full volume |
| Digital output distortion | 0.000006 ?0dB 1kHz 192k 24bit? |
| Display | LCD |
| Display details | Sampling rate, volume level, working mode, output mode, etc. |
| Remote control | Supports infrared remote control (only the one included in the accessory) |
| Sampling rate display (by LOGO light) | 48kHz and below: Cyan; Above 48kHz: Yellow; DSD: Green |
| Firmware upgrade | Supports upgrade through a USB flash disk (both USB-A and Type-C ports) |
| FiiO control | N/A |
| Button | Power button |
|---|---|
| Knob | Encoder knob (with volume control knob) |
| Digital coaxial out | RCA port |
| Digital optical out | Optical port |
| USB | USB-A (data transmission) + 2 x Type-C (data transmission + power supply? |
| Wired network | Gigabit Ethernet port |
| Reset hole | Device on, short press the button in the reset hole |
| Power consumption | Static current: 250mA (wired network connection, default brightness of screen and LOGO light)Coaxial/Optical output current: 250mA (wired network connection, default brightness of screen and LOGO light)USB output current: 290mA (wired network connection, default brightness of screen and LOGO light, no power consumption for power amp) |
|---|---|
| Power supply | DC 5V/2A |
| Product code | FIIOSR11 |
|---|---|
| EAN | 6953175721130 |