Key Features
- Class AB design
- 180W per channel into 8 ohms
- 280W per channel into 4 ohms
- 500W bridged output for higher-power systems
- 0.003% THD+N supports cleaner reproduction
Eversolo AMP-F8 Power Amplifier Overview
The Eversolo AMP-F8 is designed for hi-fi systems that need a dedicated Class AB power amplifier with strong speaker control and useful headroom. In stereo mode, it delivers 180W per channel into 8 ohms or 280W per channel into 4 ohms, giving it the power needed to drive larger floorstanding speakers with confidence.
For systems that need more output, the AMP-F8 can also run in bridged mode, delivering up to 500W into 8 ohms. Its low THD+N figure of 0.003% supports faithful signal reproduction, helping music sound cleaner, more open, and less coloured by the amplifier itself. This makes it a strong partner for serious stereo systems, larger listening rooms, and more demanding speaker setups.
Product Ref: 398061
Full Description
View Full DescriptionClass AB Power With Headroom
The AMP-F8 uses a Class AB amplifier design to deliver strong, controlled power across a wide range of listening spaces. With 180W per channel into 8 ohms and 280W per channel into 4 ohms, it can drive demanding speakers with greater confidence while maintaining a composed presentation. That extra power gives music room to breathe during louder passages, helping dynamics remain clean and controlled. Whether used in a focused listening room or a larger open space, the AMP-F8 provides dependable output without sacrificing refinement.
Bridged Mode For Higher Output
For systems that need additional power, the AMP-F8 can operate in bridged mode to deliver up to 500W into 8 ohms. This gives you greater flexibility when pairing the amplifier with larger or more demanding speakers that benefit from increased output. The additional power can help maintain control during dynamic peaks, particularly at higher listening levels or in larger rooms. Bridged operation also makes the AMP-F8 well suited to systems built around dedicated mono amplification, giving you a practical upgrade path as your setup develops.
Low Distortion Signal Reproduction
With THD+N as low as 0.003%, the AMP-F8 is designed to minimise unwanted distortion as the signal passes through the amplifier. Keeping added coloration low helps preserve the character of the original recording, allowing vocals, instruments and subtle background details to remain easier to distinguish. You can hear clearer separation between performers, more natural textures and better-defined layers within complex arrangements. This low-distortion performance also helps the amplifier remain composed at different listening levels, supporting a clean and transparent presentation without drawing attention away from the music.
Features
- Class AB amplification provides the control and headroom needed to drive demanding hi-fi speaker systems.
- 180W per channel into 8 ohms delivers strong stereo output for everyday listening and larger loudspeakers.
- 280W per channel into 4 ohms provides extra current for speakers that place greater demands on amplification.
- 500W bridged output into 8 ohms supports higher-power system configurations when additional output is required.
- Generous power reserves help floorstanding speakers deliver greater scale, control and dynamic range.
- 0.003% THD+N helps minimise unwanted distortion, preserving a cleaner and more accurate signal.
- Faithful reproduction helps reveal instrument texture, vocal detail and individual layers within complex recordings.
- Dedicated power amplifier design makes it suitable for expanding advanced hi-fi and separates-based systems.
What's in the Box?
- Eversolo AMP-F8
- Power cable
- Trigger cable
- User manual
Specifications
| Operating Mode | Class AB |
|---|---|
| Signal-to-Noise Ratio | ≥115 dB (A-Weighted) |
| Damping Factor | >400 (@ 8 Ω, 1 kHz) |
| Frequency Response | 10 Hz – 30 kHz (±0.5 dB, @ 1 W / 8 Ω) |
| Channel Crosstalk | ≤-95 dB (180 W @ 8 Ω / 1 kHz) |
| THD+N | 0.003% (@ 1 kHz) |
| Stereo Output Power | 180 W RMS @ 8 Ω280 W RMS @ 4 Ω |
| Bridged Output Power | 500 W RMS @ 8 Ω |
| Inputs | 1 × XLR Balanced1 × RCA Unbalanced |
| Input Impedance | XLR: 10 kΩRCA: 10 kΩ |
| XLR Input Sensitivity | 5.2 V (23 dB Gain)2.6 V (29 dB Gain) |
| RCA Input Sensitivity | 2.65 V (23 dB Gain)1.3 V (29 dB Gain) |
| Power Supply | 100 – 120 V, 60 Hz220 – 240 V, 50 Hz |
| Maximum Power Consumption | 1200 W |
| Dimensions (W × H × D) | 265 × 119 × 388 mm |
| Weight | 15.9 kg |
| Packaged Weight | 18.6 kg |
| Product Code | EVERSOLO-AMP-F8 |
| EAN | 6975200360268 |
| Reviews of our service
View all
