Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
Key Features
The Emotiva BasX A2L+ Power Amplifier is the BasX Plus series’ dedicated zone amp, built for second-room, compact, or multi-room audio. It swaps balanced inputs for zone-friendly features like loop outputs, auto-on sensing, and variable gain, making it ideal for expanding systems without complexity. You get 50W per channel into 8 ohms, or 90W into 4 ohms, powered by a heavy-duty linear supply and Class A/B amplification. Built for clarity and detail, it works well with speakers of all types in real-world listening environment.
This power amp includes stereo unbalanced inputs and loop outputs, so you can daisy-chain multiple amps or feed a separate headphone unit, with a variable gain control to help match speaker levels across zones. With trigger and auto-on functions, it also integrates cleanly into automated systems. You can connect bare wire, spade lugs or banana plugs via solid five-way speaker posts. This makes the A2L+ a practical and high-quality solution for expanding audio coverage in your home or commercial setup.
Product Ref: 338326
| Power Output (two channels driven) | 50 watts RMS per channel: 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms90 watts RMS per channel: 1 kHz; THD 500 |
|---|---|
| Input Sensitivity (for rated power; 8 Ohm load) | 1.2 V |
| Gain | 29 dB |
| Input Impedance | 27 kOhms |
| Input Connections | Unbalanced (RCA); one each per channel |
|---|---|
| Output Connections (loop outputs) | Unbalanced (RCA); one each per channel |
| Speaker Output Connections | Audiophile-grade 5-way binding posts |
| Trigger | Trigger Input: 5 – 12 V (AC or DC); <10 mA input current requiredTrigger Output: 12 VDC; can drive any load up to 120 mA |
| Auto-On | Turns on the BasX A2L+ when an audio signal is detected |
| Power Requirements | 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected) |
|---|
| Front Panel | Standby: Push buttonStatus LEDs: One per channel; blueStandby LED: AmberStatus LEDs change to red to indicate a fault condition |
|---|---|
| Rear Panel | AC Power switch: Rocker switch (switches AC main power)Status LEDs switch: disables front panel Status LEDsGain Reduction Adjustment: Allows you to adjust the gain of the BasX A2L+ between 18 dB to 29 dB |
| Protection note | The BasX A2L+ is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. |
|---|
| Product Dimensions (W x H x D, including feet) | 17” x 3-1/8” x 12-1/2” (approx. 431.8 x 79.38 x 317.5 mm) |
|---|---|
| Packaged Dimensions (W x H x D) | 21-1/2” x 7” x 17” (approx. 546.1 x 177.8 x 431.8 mm) |
| Net weight | 15 lbs (approx. 6.8 kg) |
| Gross weight | 23 lbs (approx. 10.4 kg) |
| Product code | Emotiva-BasX-A2L+ |
|---|---|
| EAN | 818841012966 |