Burson Soloist Voyager Balanced XLR Headphone Preamp

prev next

JUST ADDED

Key Features

6x V7 Vivid op-amps deliver detailed, dynamic playback
10W Class-A power drives demanding headphones with control
Dual-mono architecture improves separation for spacious stereo imaging
Silent Power regulation keeps background noise exceptionally low
Custom listening modes adapt easily to different setups

Burson Soloist Voyager Balanced XLR Headphone Preamp Overview

View this description in German

The Burson Soloist Voyager Balanced XLR Headphone Preamp is a flagship amplifier for demanding headphones and high-end desktop listening setups. Delivering 10W per channel of pure Class-A power, its high-current output provides the control needed to handle changing headphone impedance and sensitivity while maintaining an accurate response.

The dual-mono architecture gives each channel an independent amplifier and power supply. This reduces crosstalk and interference, helping you hear clearer stereo separation and a more spacious soundstage. Six V7 Vivid discrete op-amps further support detailed, dynamic, and transparent playback.

Second-generation Silent Power regulators provide ultra-low-noise power, keeping the background quiet so subtle details remain easier to distinguish. Dual MUSES72320 volume-control chips with discrete buffers also maintain accurate channel balance. Plus, hardware crossfeed, stereo balance adjustment, and a dedicated Headphone + Subwoofer mode let you adapt the Voyager for music, gaming, movies, headphones, or speakers.

Product Ref: 371953

Full Description

View Full Description

Specifications

Measurement

Input impedance	38 KOhms
Frequency response	± 1 dB 0 – 48Khz
THD	<0.0015%
Output impedance (Headphone Amp)	0.5 Ohm
Output impedance (Pre Out )	25 Ohm

Package Content

Soloist Voyager (V-220)

Remote Control

With SP02 power modules installed

Standard / Deluxe – 24V5A PSU / Super Charger 5A

Standard / Deluxe – V6 Vivid / V7 Vivid Pro Audio Opamps

Regional Power Cable

Headphone Output Performance

16 Ohm	Power XLR / SE: 10 / 5W Signal to Noise Ratio: 116db Separation: 99%
32 Ohm	Power XLR / SE: 8 / 4W Signal to Noise Ratio: 111db Separation: 99%
100 Ohm	Power XLR / SE: 3.8 / 1.9W Signal to Noise Ratio: 110db Separation: 99%
150 Ohm	Power XLR / SE: 1.3W / 0.65W Signal to Noise Ratio: 110db Separation: 99%
300 Ohm	Power XLR / SE: 0.64 / 0.32W Signal to Noise Ratio: 109db Separation: 99.50%

General

Inputs	2 x XLR2 x RCA1 x Mic Bypass
Outputs	1 x XLR Preamp1 x RCA Preamp1 x RCA Subwoofer Output1 x XLR Headphone Jack1 X SE Headphone Jack
Weight	App. 7 kg (15.5Pounds)
Dimensions	265 x 270 x 85 mm (10.2 x 10.6 x 3.3 inches)
Product Code	BA1130

| Reviews of our service

Oops! There was an error retrieving our TrustPilot reviews. Please, try again later.