Unsupported Browser
The web browser that you are currently using is no longer supported, and as such features of this website may not work as expected. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience.
If you love the way you’re K3 integrated amplifier produces music, but want a little more separation, then, the K3 Power Amplifier is the perfect upgrade for you. Being perfectly matched to the integrated amplifier means it carries all the same musical qualities allowing you to drive both high and low frequencies independently. So, if you’re looking to bring the very best out of the K3 System or just want to open up your system, then take a look at the Roksan Kandy K3 Power Amp and let it bring those special touches that only good electronics do.
Product Ref: 202848
If you love the way you’re K3 integrated amplifier produces music, but want a little more separation, then, the K3 Power Amplifier is the perfect upgrade for you. Being perfectly matched to the integrated amplifier means it carries all the same musical qualities allowing you to drive both high and low frequencies independently.
Bi-Amping both the integrated and power is a simple RCA to RCA connection linking to the two Roksan Amps. You can also experiment using either the integrated amp to drive the high or low frequencies and power to drive the opposite frequency not being driven by the integrated. You may find that you prefer it more one way than the other.
The Roksan K3 Poweramp is not just about it being used with the Roksan equipment, it will happily work with other Integrated Amps and AV Receivers helping you to achieve your systems true potential.
So, if you’re looking to bring the very best out of the K3 System or just want to open up your system, then take a look at the Roksan Kandy K3 Power Amp and let it bring those special touches that only good electronics do.
Inputs: | Stereo RCA (L&R), Stereo XLR Balanced |
---|---|
Outputs: | Stereo Loop RCA, Stereo Loop XLR Balanced |
Input Impedance: | 23 k ohms |
Input Sensitivity: | (115W) - 900 mV |
Speaker Output: | L & R (x1) |
Output Power: | >140W (8 ohms), >220W (4 ohms) |
Power Supply: | 500 VA Ultra Low Noise Toroidal Transformer |
Damping Factor: | >110 (8 ohms) |
Frequency Response: | (-3dB), <3Hz - >100kHz |
Gain: | 31.6 dB |
Harmonic Distortion: | <0.003% 1kHz - 8 ohms |
Signal-to-Noise: | 130dBr (ref. 33.5 mV) |
Power Source: | 220V - 240V 50Hz / 60Hz |
Power Consumption: | Warm up mode <25W |
Full Power | <800W |
Dimensions: (W x D x H): | 432 x 380 x 105mm (incl. feet) |
Weight: | 14kg |